Full Service Catalogue
Software modifications for every goal
Performance
Stage 1 Performance Calibration
Base remapping of the ECU to increase the vehicle's performance — no additional modifications required.
Stage 2 Performance Calibration
Advanced calibration for vehicles with supporting hardware upgrades — maximum safe power on stock internals.
Pops & Bangs
Custom overrun fuel mapping for an aggressive motorsport exhaust crackle and pop on deceleration.
Anti Lag
Keeps the turbo spooled during deceleration for instant boost response on re-application of throttle.
Launch Control
Enables controlled maximum-RPM launches for optimal standing-start acceleration.
Hard Cut Limiter
Hard rev cut at a set RPM for motorsport applications — aggressive cut-and-bang sound profile.
DSG Farts
Enables aggressive upshift burbles on DSG/DCT transmissions for a motorsport exhaust note.
Torque Unlock
Releases factory-restricted torque for improved pulling power and drivability.
Torque Monitoring Deactivation
Removal of all torque monitoring functions and related DTC codes for unrestricted calibration.
Rev Limiter (Max RPM)
Raises or removes the engine rev limiter for motorsport and track-day applications.
Speed Limiter (Vmax) Off
Removes the factory electronic speed limiter, allowing the vehicle to exceed the manufacturer limit.
Limited Vmax to Specific Speed
Sets a custom speed limiter at a specific speed of your choice, lower or higher than factory.
Performance Gauge (BMW/Mini/VAG)
Enables hidden performance gauges (boost, torque, G-force) in the factory instrument cluster.
Deactivation
DPF Deactivation
Full software deactivation of the Diesel Particulate Filter regeneration cycle and related sensors.
GPF / OPF Deactivation
Software deactivation of the Gasoline/Petrol Particulate Filter regeneration and monitoring routines.
EGR Deactivation
Disables the Exhaust Gas Recirculation valve at software level, removing related fault codes.
SCR / AdBlue Deactivation
Removes AdBlue dosing and SCR-related monitoring routines from the ECU calibration.
Full Emissions (DPF/EGR/AdBlue)
Complete deactivation of all emissions systems — DPF, EGR and AdBlue/SCR in one package.
DPF + EGR Off
Combined DPF and EGR deactivation package — cost-effective solution for diesel emissions removal.
OPF Off + Decat
Combined OPF/GPF deactivation and catalyst removal software package.
Lambda Sensor Deactivation
Disables the Lambda sensor, allowing physical removal for de-cat applications.
Catalyst Deactivation
Deactivation of related sensors allowing physical catalyst removal.
NOx Sensor Deactivation
Disables NOx sensor monitoring and related fault codes.
MAF Deactivation
Deactivation of Mass Air Flow sensor functions, allowing complete disconnection.
EVAP Deactivation
Deactivation of the Evaporative Emission Control System and related monitoring.
Swirl Flaps Off
Deactivation of the Variable Swirl Actuator functions and related DTC codes.
Secondary Air Pump Off
Deactivation of the Secondary Air Injection system and related routines.
TVA Deactivation
Deactivation of all Throttle Valve Actuator functions and related DTC codes.
Start/Stop System Deactivation
Disables the Start/Stop system, preventing automatic engine shut-offs at standstill.
Exhaust Flaps Deactivation
Deactivation of exhaust flaps, allowing open flaps at all times.
Cylinder on Demand Off
Disables the cylinder deactivation / half-engine mode and related monitoring.
Active Grill Shutter
Deactivation of active grill shutter control for improved airflow on modified vehicles.
Immo Off
Immobilizer deletion — allows engine start without the original key. For engine swaps and test setups.
Corrections
Oil Pressure Correction
Corrects oil pressure mapping for modified engine configurations.
Cold Start Rattle Fix
Resolves cold start rattle noise through revised injection timing.
Hot Start Fix
Resolves hot start issues through adjusted cranking and fuel maps.
Thermal Control
Adjusts cooling fan and thermal management maps to address overheating on modified vehicles.
Cold Start Noise Deactivation
Disables cold start noise enrichment for quieter morning starts.
Cat Heating
Adjusts or disables catalyst heating routines for modified exhaust systems.
Checksum Correction
Manual checksum correction and repair for modified ECU files.
Idle RPM Adjustment
Custom idle RPM mapping for modified camshafts or engine configurations.
Neutral RPM Adjustment
Adjusts neutral idle RPM behavior for modified vehicles.
Map Sensor Recalibration
Recalibrates the MAP sensor for modified intake or boost configurations.
High Pressure Fuel Pump Recalibration
Recalibrates the HPFP for modified fuel system hardware.
E85 Conversion
Full flex-fuel calibration for E85 bioethanol — revised injection, boost and ignition mapping.
Smart Regeneration
Optimized DPF regeneration strategy for reduced fuel consumption and extended filter life.
Warranty Patch (BMW/Mini/VAG)
Prevents FSC-related fault codes when flashing custom calibrations on BMW/Mini/VAG platforms.
Diagnostics
DTC Fault Code Removal
Software-level removal of specific recurring fault codes that do not affect emissions compliance.
Readiness Monitor
Readiness calibrations allowing pass on the on-board test via OBDII connection.
Restore to ORI
Restores the ECU to the original factory calibration file.
Professional Diagnostics
Full-scope workshop diagnostics
Beyond file calibration, our workshop is equipped with the Launch X431 Pro Elite diagnostic platform — covering routine service resets, coding procedures, and advanced component adaptations across virtually all modern vehicle makes.
Launch X431 Pro Elite — supported procedures
All services below are performed in-house using professional licensed diagnostic equipment.
…and much more. Contact us with your specific diagnostic requirement.